Browsing by Author "Ozcirpici, Ayca Arman"

Now showing 1 - 9 of 9

Association Between Impacted Maxillary Canines and Adjacent Lateral Incisors: A Retrospective Study With Cone Beam Computed Tomography
(2021) Koral, Sevgi; Ozcirpici, Ayca Arman; Tuncer, Nilufer Irem; 35110220
Objective: The goal of this study was to evaluate the association between the morphologic characteristics of maxillary lateral incisors and maxillary canine impaction by using cone beam computed tomography (CBCT) images. Methods: CBCT images of 52 patients (19 male and 33 female) with unilateral impacted maxillary canines were selected.The volume, root, and total lengths of the lateral incisor, mesiodistal and buccolingual widths of the lateral incisor crowns, angles between the central axis of the lateral incisor and the midline, occlusal plane, and the central axis of canines in both the impacted and non-impacted side were measured and compared. Results: Statistically significant differences were obtained when comparing the volume of the lateral incisor, the mesiodistal and buccolingual widths of the lateral incisor crown, the root and total lengths of the lateral incisors, and angles between the central axis of the lateral incisor and the midline arid the central axis of the adjacent canine (P < .05). There were no significant differences in lateral incisor axis and the maxillary occlusal plane angulation. Conclusion: The association between the morphologic and angular features of the maxillary lateral incisors and maxillary canine impaction was confirmed. The volume of the lateral incisor, mesiodistal and buccolingual width of the lateral incisor crown, root and the total length of the lateral incisor, and the lateral incisor angulation to the midline and the axis of adjacent canine were found to be strong predictors of maxillary canine impaction.
Biomechanical evaluation between orthodontic attachment and three different materials after various surface treatments: A three-dimensional optical profilometry analysis
(2019) Kurt, Irem; Cehreli, Zafer Cavit; Ozcirpici, Ayca Arman; Sar, Cagla; 30855180
Objectives: To determine the best bonding method of orthodontic attachment among monolithic zirconia, feldspathic porcelain, hybrid porcelain, and the impact of surface-conditioning methods using a three-dimensional optical profilometer after debonding. Materials and Methods: 56 feldspathic porcelain, 56 monolithic zirconia, and 56 hybrid porcelain samples were divided into four surface treatment subgroups: (1) hydrofluoric (HF) acid etch + silane, (2) Al2O3 sandblasting + silane, (3) silicoating (SiO2), and (4) diamond bur + silane. The specimens were tested to evaluate shear bond strength (SBS). Residual composite was removed after debonding. Three-dimensional white-light interferometry was used to obtain quantitative measurements on surface roughness. Results: The highest SBS value was found for the HF acid-etched feldspathic porcelain group. The average surface roughness values were significantly higher in all material groups in which diamond bur was applied, while roughening with Cojet provided average surface roughness values closer to the original material surface. Conclusions: Variations in structures of the materials and roughening techniques affected the SBS and surface roughness findings.
Correlation Between Cephalometric Nasal Changes and Patients' Perception After Orthognathic Surgery
(2021) Atakan, Azize; Ozcirpici, Ayca Arman; 33741253
Introduction: The purpose of this study was to evaluate the correlation between cephalometric measurements and patients' perception of nasal changes in those with Class III malocclusion who had undergone orthognathic surgery. Methods: Eighty-five patients (36 men and 49 women) who received maxillary advancement with (group 1) or without (group 2) maxillary impaction were included in this study. Lateral cephalometric radiographs taken before and at the end of the treatment were analyzed. The patients were given an esthetic evaluation form and asked to evaluate their own noses on the Likert scale (subjective perception), while at the same time, they were asked to evaluate profile silhouettes without knowing that it was their own profile (objective perception). The changes and correlations between the cephalometric measurements and the scores obtained from the esthetic perception questionnaire were evaluated statistically. Results: Postoperative nasal tip inclination and rotation, nasofacial angle, and sagittal position of pronasale had increased significantly (P <0.05), whereas nasal tip protrusion, nasofrontal angle, and vertical position of pronasale had decreased (P <0.05). The change in the nasolabial angle and vertical position of pronasale was statistically different between the 2 surgical groups (P <0.05). In the end, a significant increase was observed in the patients' objective nasal esthetic scores (P <0.05). Conclusions: Soft tissues are affected by the vertical and sagittal surgical movements of the maxilla. There was a moderate correlation between patients' perception of nasal changes and cephalometric measurements. The subjective evaluation of the nose was similar among patients after surgery, but in the objective assessment, patients found their noses more esthetic.
Dentofacial Effects of Skeletal Anchored Treatment Modalities For The Correction of Maxillary Retrognathia
(2014) Sar, Cagla; Sahinoglu, Zahire; Ozcirpici, Ayca Arman; Uckan, Sina; https://orcid.org/0000-0003-4966-9779; https://orcid.org/0000-0002-9250-3689; 24373654
Introduction: The aim of this clinical study was to investigate the skeletal, dentoalveolar, and soft-tissue effects of 2 skeletal anchorage rationales for Class III treatment compared with an untreated Class III control group. Methods: Fifty-one subjects who were in the prepubertal or pubertal growth period were included in the study. In group 1 (n = 17), facemasks were applied from miniplates placed in the lateral nasal walls of the maxilla, and intermaxillary Class III elastics were applied from symphyseal miniplates to a bonded appliance on the maxilla in group 2 (n = 17). These skeletal anchored groups were compared with an untreated control group (n = 17). Lateral cephalometric radiographs were obtained at the beginning and the end of the observation periods in all groups and analyzed according to the structural superimposition method. Differences between the groups were assessed with the Wilcoxon signed rank test or the paired-samples t test. Results: The treatment periods were 7.4 and 7.6 months in groups 1 and 2, respectively, and the untreated control group was observed for 7.5 months. The maxilla moved forward by 3.11 mm in group 1 and by 3.82 mm in group 2. The counterclockwise rotation of the maxilla was significantly less in group 1 compared with group 2 (P < 0.01). The mandible showed clockwise rotation and was positioned downward and backward in the treatment groups, and it was significantly greater in group 2 compared with group 1 (P < 0.01). Changes in the maxillary incisor measurements were negligible in group 1 compared with group 2. A significant amount of mandibular incisor retroclination was seen in group 1, and a significant proclination was seen in group 2. The maxillomandibular relationships and the soft-tissue profiles were improved remarkably in both treatment groups. Conclusions: The protocols of miniplates with facemasks and miniplates with Class III elastics offer valid alternatives to conventional methods in severe skeletal Class III patients. However, the 2 maxillary protraction protocols demonstrated significant skeletal and dentoalveolar effects. The miniplate with facemask protocol is preferred for patients with severe maxillary retrusion and a high-angle vertical pattern, whereas in patients with a decreased or normal vertical pattern and retroclined mandibular incisors, miniplates with Class III elastics can be the intraoral treatment option. Therefore, the exact indication of the procedure should be considered carefully.
Early Maxillary Expansion with the Ni-Ti Memory Leaf Expander-A Compliance-Free Fixed Slow Maxillary Expansion Screw: A Report of 2 Cases
(2021) Ulug, Bahar; Ozcirpici, Ayca Arman; 35110164
Transversal problems such as crowding and crossbite are one of the most common problems dealt with in early orthodontic treatments. Early correction of these problems may ease or even eliminate the future need for treatment. This paper presents the management of 2 cases with transverse discrepancy using the Ni-Ti Memory Leaf Expander-a new compliance-free slow maxillary expansion appliance. The total treatment time for both cases was 9 months. In both cases, the inter-canine, inter-premolar, and inter-molar distances, as well as the arch length, have all increased.
Modified Haas Expander for the Treatment of Anterior Openbite and Posterior Crossbite Associated with Thumb Sucking-A Case Report: 3-Years Follow-Up
(2019) Muradova, Nargiz; Ozcirpici, Ayca Arman; 32110471
Thumb sucking is an abnormal habit that occurs in childhood and can cause several malocclusions if it persists for a long time. Malocclusions caused by oral habits require proper treatment timing to maintain a normal growth and should be treated at an early age. This case report shows the management of thumb sucking and early correction of anterior open bite and posterior crossbite by a modified Haas expander. Three-year follow-up results showed the effectiveness of this special designed appliance.
Psychosocial and Functional Outcomes of Orthognathic Surgery: Comparison with Untreated Controls
(2015) Sar, Cagla; Soydan, Sidika Sinem; Ozcirpici, Ayca Arman; Uckan, Sina; 0000-0002-9250-3689
Objectives: Orthognathic surgery is a procedure for patients with dentofacial deformities and provides dramatical dentofacial and psychological alterations. The aim of this controlled study was to evaluate how orthognathic surgery affects patients' psychosocial well-being and compare them with patients having dentofacial discrepancies and with individuals who do not have any skeletal discrepancies. Methods: Hundred and sixty-three adult individuals were included in this study as three groups: patients who underwent orthognathic surgery, patients having skeletal discrepancies and individuals who do not have any skeletal discrepancies. Patients in all groups were asked to fill out two questionnaires concerning the psychological and physical status of the patients at that moment and additional questions were asked to patients in post-surgical phase regarding post-surgical satisfaction. Categorical variables were statistically evaluated by Fisher Exact and chi-square tests. Results: Patients who were going to seek orthognathic surgery were significantly concerned about their dentofacial appearance, body image and psychosocial status when compared with patients in the post-surgical phase and the individuals who did not have skeletal discrepancies. The results of the patients who underwent orthognathic surgery were approximated to the results of non-patient control group and had high degrees of satisfaction with improvement in appearance brought about by surgery at 6-month post-operatively. Conclusion: Following orthognathic surgery, patients had better psychosocial status when compared to patients without skeletal deformities. Patients in the pre-surgical phase were not only functionally but also psychosocially the least satisfied group of individuals. (C) 2014 Asian AOMS, ASOMP, JSOP, JSOMS, JSOM, and JAMI. Published by Elsevier Ltd. All rights reserved.
Sagittal skeletal correction using symphyseal miniplate anchorage systems: Success rates and complications
(2019) Cubuk, Secil; Kaya, Burcak; Sahinoglu, Zahire; Ates, Ufuk; Ozcirpici, Ayca Arman; Uckan, Sina; 30413832
ObjectivesAim of this study is to evaluate success rates and complications related with symphyseal miniplate anchorage systems used for treatment of Class2 and Class3 deformities.MethodsAtotal of 58miniplates applied to 29growing patients were evaluated. The first group comprised 24symphyseal miniplates applied to 12patients and Forsus Fatigue Resistant Devices were attached to the head of the miniplates for mandibular advancement. The second group consisted of 34symphyseal miniplates applied to 17patients and intermaxillary elastics were applied between acrylic appliances placed on the maxillary dental arch and the symphyseal miniplates for maxillary protraction. Success rate and complications of the symphyseal plate-screw anchorage system were evaluated.ResultsThe overall success rate of symphseal miniplates was 87.9%. Six miniplates showed severe mobility and 2miniplates broke during orthodontic treatment. Infection, miniplate mobility and mucosal hypertrophy were statistically different between the two groups.ConclusionsSymphyseal miniplates were generally used as successful anchorage units in most patients. Infection, mobility, and mucosal hypertrophy occurred more frequently in Class2 deformity correction. However, the success rates regarding the two treatment modalities were comparable. ZusammenfassungZieleZiel der vorliegenden Studie ist es, Erfolgsraten und Komplikationen im Zusammenhang mit symphysealen Miniplattenverankerungssystemen zur Behandlung von Klasse-II- und -III-Anomalien zu bewerten.MethodenAusgewertet wurden insgesamt 58Miniplatten, die bei 29Patienten im Wachstum inseriert wurden. In der ersten Gruppe wurden 24symphyseale Miniplatten bei 12Patienten inseriert. Zur Korrektur der Unterkieferrucklage wurden Forsus-Apparaturen an den Miniplatten verankert. In der zweiten Gruppe wurden 34symphyseale Miniplatten bei 17Patienten inseriert. Zur Protraktion des Oberkiefers wurden intermaxillare Elastics verwendet, die zwischen Acrylgeraten im Oberkiefer und den symphysealen Miniplatten eingehangt wurden. Untersucht wurden Erfolgs- und Komplikationsraten des symphysealen Platten-Schrauben-Verankerungssystems.ErgebnisseDie Gesamterfolgsrate der symphsealen Miniplatten betrug 87,9%. Bei 6Miniplatten zeigte sich eine hohe Mobilitat, 2frakturierten wahrend der kieferorthopadischen Behandlung. Das Auftreten von Infektion, Miniplattenmobilitat und Schleimhauthypertrophie war zwischen den beiden Gruppen statistisch unterschiedlich.SchlussfolgerungenSymphyseale Miniplatten wurden in der Regel bei den meisten Patienten als erfolgreiche Verankerungseinheiten eingesetzt. Infektion, Mobilitat und Schleimhauthypertrophie traten haufiger bei Klasse-2-Korrekturen auf, die Ergebnisse beider Behandlungsmethoden unterschieden sich jedoch nur geringfugig.
Treatment of Class II, Division 2 Malocclusion with Miniscrew Supported En-Masse Retraction: Is Deepbite Really an Obstacle for Extraction Treatment?
(2017) Tuncer, Nilufer Irem; Ozcirpici, Ayca Arman; 30112498
A 17-year-old female patient, whose chief complaint was her unpleasing smile, had skeletal and dental class II malocclusion, hypodivergent facial type with a severely increased overbite. Among the treatment options, upper-first-premolar extractions followed by miniscrew-supported en-masse retraction was the treatment of choice. After the initial levelling and alignment, miniscrews with 1.5- to 1.4-mm diameter and 7-mm lenght, were installed between the roots of the second premolars and the first molars, bilaterally. En-masse retraction was achieved on a 0.016x0.022-inch stainless steel archwire with 7-mm long power hooks placed distal to the lateral incisors, and with nickel-titanium (NiTi) closed coil springs exerting 250-gr of force per side. At the end of the treatment, deepbite, incisor inclinations and interincisal angle were corrected, and Class II molar relationship with good intercuspation was achieved. Upper 2-2, lower 3-3 retainers were bonded for retention. As a result, deepbite and Class II canine relationship was successfully corrected with simultaneous incisor intrusion and retraction using miniscrew-supported en-masse retraction.